surface mount ceramic chip capacitors x5r dielectric kemet is pleased to continue the expansion of high capacitance ratings in our x5r ceramic chip capacitors to include the following values in our base metal electrode devices. 0603/x5r - 1.2f (125) ? 2.2f (225) @ 10 volts 0805/x5r - 5.6f (565) ? 10.0f (106) @ 10 volts 1206/x5r - 12.0f (126) ? 22.0 (226) @ 10 volts table 1 dimensions - millimeters (inches) new product bulletin outline drawing f-9034 06/05 eia size code metric size code l length w width b bandwidth s - min. separation mounting technique 0603 1608 1.6 (.063) 0.15 (.006) 0.8 (.032) 0.15 (.006) 0.35 (.014) 0.15 (.006) 0.7 (.028) solder wave or reflow 0805 2012 2.0 (.079) 0.2 (.008) 1.25 (.049) 0.2 (.008) 0.5 (.02) .25 (.010) 0.75 (.030) solder wave or reflow 1206 3216 3.2 (.126) 0.2 (.008) 1.6 (.063) 0.2 (.008) 0.5 (.02) .25 (.010) n/a solder wave or reflow see table 2 for thickness dimension.
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? (864) 963-6300 ? www.kemet.com electrical parameters as detailed in the kemet surface mount catalog f3102 for x5r, with following specific requirements based on room temperature (25c) parameters: ? operating range: -55c to +85c, with no-bias capacitance shift limited to 15% over that range ? insulation resistance (ir) measured after 2 minutes at rated voltage @ 25c: limit is 500 megohm microfarads. ? capacitance and dissipation factor (df) measured at the following conditions. df limit is 10%. 1 khz and 1 vrms if capacitance 10 f 120 hz and 0.5 vrms if capacitance > 10 f soldering process these components are suitable for wave or reflow soldering. all parts incorporate the standard kemet barrier layer of pure nickel, with an overplate of pure tin to provide excellent solderability as well as resistance to leaching. marking these chips are normally supplied unmarked. if required, they can be laser marked as an extra cost option. more detail on the marking format is included in our surface mount catalog f3102. in general, the information in the kemet surface mount catalog f3102 applies to these capacitors. the information in this bulletin supplements that in the catalog. table 2 - x5r - capacitance value extensions (1) to complete kemet part number, insert the alpha code for the tolerance desired. k = 10%; m = 20% capacitance values (f) kemet part number voltage capacitance tolerance thickness mm qty 7? reel qty 13? reel 1.2 c0603c125(1)8pac 10 k,m 0.8 0.1 4,000 10,000 1.5 c0603c155(1)8pac 10 k,m 0.8 0.1 4,000 10,000 1.8 c0603c185(1)8pac 10 k,m 0.8 0.1 4,000 10,000 2.2 c0603c225(1)8pac 10 k,m 0.8 0.1 4,000 10,000 5.6 c0805c565(1)8pac 10 k,m 1.25 0.15 2,500 10,000 6.8 c0805c685(1)8pac 10 k,m 1.25 0.15 2,500 10,000 8.2 c0805c825(1)8pac 10 k,m 1.25 0.15 2,500 10,000 10.0 c0805c106(1)8pac 10 k,m 1.25 0.15 3,000 10,000 12.0 c1206c126(1)8pac 10 k,m 1.60 0.15 2,000 8,000 15.0 c1206c156(1)8pac 10 k,m 1.60 0.15 2,000 8,000 18.0 c1206c186(1)8pac 10 k,m 1.60 0.15 2,000 8,000 22.0 c1206c226(1)8pac 10 k,m 1.60 0.15 2,000 8,000
|
